I ride a Reise & Mueller Birdy Mk3 mostly because I think folding bikes are neat and the Birdy has my favorite fold. The other rationale was that I wanted a nice bike I'd never have to lock up outside in NYC. The intention was to use it as a commuter since not spending on the subway would pay for it pretty quickly but shortly after I got it I started working remote so I've only done commutes on it for a couple weeks of gig jobs and it's mostly a recreational bike.
I went through an extended project to make it faster and wound up with a loop handlebar for body position, replaced the wheelset to move from 355 to 406 for tire selection and did the drivetrain at the same time to accommodate a 9-32 cassette. Between the wheels and the sub-11 tooth sprockets I can pedal up to ~26mph instead of ~20mph on the stock setup (good enough) and the low end is about the same. It doesn't perform like a race bike but it's pretty close to an endurance road bike. I do 20 mile rides a couple times a week on it and I've done a couple centuries.
The Birdy is my main bike but I'm a folding and recumbent enthusiast in general. The addition of the fold or moving the cranks in front of the rider means the obvious solution diamond frame doesn't work and I like seeing the creativity of the solutions. I've also owned a Xootr Swift that I gave away to my nephews, a Bike Friday Sat-R-Day folding recumbent for riding slowly in the parks, and a Baron Optima lowracer recumbent that I prefer for rides over 90 minutes.
It's a shame that it never went into production, but I guess at that time Optima already saw the writing on the wall that two-wheel recumbents wouldn't be profitable for much longer.
I'm particularly delighted that the fold is unique; I've never seen anything similar. Thanks for sharing; this is the sort of thing I look for on the Internet.
I've spent years of my life absolutely alone; gone months without talking to another person. There isn't anything you'll do that will give you the emotional fulfillment of interacting with someone else.
As for living with yourself:
Find some sort of exercise you don't mind doing and make it non-optional. The goal isn't to go all out, just get your heart rate up for half an hour. You won't want to do it sometimes but you still have to go. You can do a crappy job at it and slack off for a day or two but you have to go out. For me this is riding a bike.
Otherwise it's good to be absorbed in something. It's not the same feeling but there is intrinsic satisfaction in learning / building / experiencing things.
I map caps to ctrl and do ctrl-[ to get to normal mode. The main reason is using Vim bindings in other editors where Esc can get intercepted by other bindings but ctrl-[ has always worked everywhere.
My opinion is that going back to normal mode is too important a key to be a key combo, and a weird one at that (is it [ or ] ?). I am pretty sure you can get used to it but we humans get used to anything really, doesn't make it good. My pressing on CapsLock happens at a subconscious level. Quick edit and then punctuate with CapsLock with the pinkie. Some random key combo is not acceptable.
But again my point is that the default sucks. You probably learned a about Ctrl + [ while looking online for alternatives after realizing the default sucked
But you do have to install and configure xcape. By native I meant something that would either be an gui option on your DE or a simple command from something that is already installed on a linux distro like `setxkbmap`
> I'm sure I could learn to be slightly faster on dvorak/colemak
As near as I can tell, people generally type at similar speeds regardless of layout. If you're aiming for speed typing [1], I can see it making a difference, but chances are you're not going to see much of a difference. I type on an alpha-thumb layout (Hands Down Vibranium, the R key is under my left thumb) on an ergo keyboard. It's like using a fountain pen versus a cheap ballpoint or a nice mechanical keyboard vs a membrane keyboard. The experience is nicer but it's not a fundamentally different process. Being on a weird setup, I was concerned about "what if my keyboard breaks", "what if I'm on a public computer", etc and the solution is just to not forget qwerty. I use the laptop keyboard every other day or so for something short like a comment and it's fine.
What my personal setup does let me do is have my wrists in a neutral position with my arms resting on chair armrests and no active muscle effort. Between the efficient layout and small keyboard I never need to move my hands at all. This means that my wrists are just as well positioned after 12 hours as they are at the start and that's what has been letting my stress injuries recover.
> CATL is claiming mass production of their sodium-ion batteries starts in December, with a target price of $10/kWh.
This got widely reported but there doesn't seem to be any source. I'll reference this video [1] to cover the claim along with a comparison to industry projections. Apologies for the video link but I don't have an article handy that addresses the topic as directly.
You're right, I can't find any primary sources for this number. Yahoo[1] reports this number and attributes it to Bloomberg NEF but I can't find an actual article from Bloomberg with this number, or any actual target number in it.
Rich Hickey had nothing to do with it. He did put a lot of the initial work to get Clojurescript up and running but for many years the majority of cljs maintenance and shepherding was done by David Nolan. Not sure now; I've been out of the loop for years.
The Clojurescript community was the first group adoption of React outside Facebook (early on they had community news blog post and mentioned it) but that because the React rendering model fit the Clojure data model. I was active in the NYC Clojure meetup at the time (Rich was from upstate and would only come in for big announcements, and David was local) and we had 4 or 5 months where there was active discussion among the web devs after the talk on how to make cljs actually work. My memory is Brandon Bloom is the one who made the React connection. David picked up the idea and promoted it to the wider community.
I thought I could recall some post/article where Rich Hickey said something positive about React but I can't find it. Maybe I made it up in my head idk.
I have a Chocofi (36 key, 3x5 + 3 thumb per half). My complaint with the Cornes is that the keyboard doesn't have enough stagger for where they thumb cluster is positioned. Either the thumb cluster should move out like the ZSA voyager or more stagger is needed like Ferris sweep and most newer boards at a similar size including mine.
I'm curious but not particularly enthusiastic about keywells because I find the biggest improvement with a split keyboard is the tenting. My personal setup uses heavy tenting+tilting (basically half of a square base pyramid split on the square's diagonal) with the keyboard in my lap and my forearms resting on the chair arms locks me into a neutral wrist position without any active muscle effort. Keeping a good wrist position through the entire day instead of just the first half makes a noticeable difference.
Finally, I use the neutral thumb keys for shift on hold but I don't use any other thumb holds because I believe it has stress injury risks[1]. They're used for important but relatively infrequent keys: backspace, enter, tab, esc.
Yeah, I have found it most comfortable to use two keys on each thumb cluster. Space, Enter, Layer 1, Layer 2. I also like how ZSA's thumb cluster it moved out (Keyboardio really did it the best imho), but for some reason the keywell on the glove80 makes it much easier on my pinkies than the ortho layout on the voyager.
How did you find an ideal tent + tilt setup? Whenever I've tried I've wound up with sore wrists or hands, so just gave up. It seems like the glove80 w/out wrist rests does "good enough" so I stopped trying to optimize, even though the temptation remains.
I've seen some members of the erg keyboard community design and print their own pcbs based on their hand dimensions. I just don't have the time for it and fear how far down the rabbit hole I'd wind up if I did.
I had the idea that the best position for long sessions would be the most relaxed one so I put my hands in my lap on top of a lapboard (old Wacom tablet) and tried to put they keyboard halves under my fingers. I cut up a shipping box for the tenting stand. It took me eight iterations with three fresh starts but doesn't take that long with cardboard and tape. Stick the keyboard onto the stand with double sided tape, fill the cardboard pyramid with change for weight, and it's been like that for eight months. I'll come up with a more permanent solution at some point but it's working well so I'm not in a hurry.
The positioning was mostly about getting the wrists straight with the keyboard halves in-plane. The in-plane part was, naturally, the tricky part and that was mostly about getting the pinky corners set and then small adjustments until the index corners felt good. I have it set so perfectly aligned requires me to slightly lift my arms off the armrests which prevents sore spots on the forearms. At rest with the sides of my palms on the lapboard my fingers are off to the side of the keys but I can still type.
> I've seen some members of the erg keyboard community design and print their own pcbs based on their hand dimensions
I follow the reddit community and see those as well. Someone started up a business selling fitted keywell boards (Cyboard) but the general consensus seems to be that the glove80 is good enough. I have some patches on my local ZMK (mostly changing chord detection) but no particular desire to do the hardware side. If I had a 3d printer I might consider it since apparently hand wiring isn't that hard if you have a print to hold the switches.
As an EDSF gamer (blame Tribes) I agree but I've run into issues with (IIRC) E, Shift, and Space on keyboards that aren't n-key rollover but it's been over a decade since I last owned one. So I think that's the reason for WASD.
reply